{"product_id":"dichtol-am-hydro-1l","title":"dichtol AM Hydro 1L","description":"\u003cp\u003e\u003cstrong\u003eDIamant - \u003cmeta charset=\"utf-8\"\u003edichtol AM Hydro\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eDichtol AM Hydro\u003c\/strong\u003e is a ready-to-use polymer system for \u003cstrong\u003esealing\u003c\/strong\u003e additively manufactured components. The \u003cstrong\u003ewater-based\u003c\/strong\u003e sealer is not a hazardous substance and is therefore particularly user-friendly. The sealer can be used to seal additively manufactured components against various liquids and gases and protect them from environmental influences. The sealer can be used for all common printing processes and printing materials.\u003cbr\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStorage\/Shelf life\u003c\/strong\u003e\u003cbr\u003eStore in the original, unopened container in a dry, cool and frost-free place (+5°C to +30°C). Shelf life 2 years.\u003c\/p\u003e\n\u003cdiv class=\"page\" title=\"Page 2\"\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003eClose the opened container as airtight as possible after use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eProcessing\/Preparation\u003cbr\u003e\u003c\/strong\u003eThe product is a 1-component system. Please consider the processing temperatures specified in the technical data. Application on surfaces that are too warm can have a negative effect on the penetration behaviour of the sealer, as can application at temperatures that are too low.\u003c\/p\u003e\n\u003cdiv class=\"page\" title=\"Page 2\"\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003eThe application options are briefly explained below. \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eDipping\u003c\/strong\u003e\u003cbr\u003e\u003c\/em\u003eThis method is particularly suitable for small and complex components that need to be evenly sealed. Pour the sealer into a sufficiently sized container and place the components to be sealed inside. After a sealing time of approx. 5 minutes, remove the components and place them on a suitable surface to drain and dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eBrushing on\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003eThis method is particularly suitable for components that are not to be sealed in all areas and for larger surfaces. Apply the sealer to the surface to be sealed using a suitable brush. Ensure that the sealer is left to work for at least 5 minutes. During this time, the surface must be kept constantly moist, so apply several coats if necessary.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"page\" title=\"Page 3\"\u003e\n\u003cdiv class=\"layoutArea\"\u003e\n\u003cdiv class=\"column\"\u003e\n\u003cp\u003eThis method is particularly suitable for components with very large surfaces that need to be evenly sealed. Use the ready-to-use spray bottle or a suitable paint spray gun and spray the sealer onto the surface to be sealed. To ensure a sufficient contact time of at least 5 minutes, keep the surface moist by spraying several times.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eInjecting\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003eThis method is particularly suitable as a supplement to brushing or spraying to seal hard-to-reach areas, drill holes, fine channels, etc. Draw up the sealer in a syringe and fill the cavity to be sealed with it. After a sealing time of at least 5 minutes, pour off the excess sealer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eCuring\u003c\/strong\u003e\u003cbr\u003eThe sealer physically hardens in a few hours (approx. 1 hour per mm of wall thickness). The sealer is dry on the surface after just a few minutes so that the components can be moved again quickly. Curing at an elevated temperature in an oven is not necessary, but can significantly shorten the curing time.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"MyRuggedBox","offers":[{"title":"Default Title","offer_id":53800773419347,"sku":null,"price":82.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/2844\/4755\/files\/2589_dichtol-AM-Hydro_1L_Online-Shop_Amazon_englisch-scaledcopy2.jpg?v=1763927807","url":"https:\/\/myruggedbox.com\/products\/dichtol-am-hydro-1l","provider":"MyRuggedBox","version":"1.0","type":"link"}